SBS-S12D4

Description

The SBS-S12D4 combines the new Type-S 12″ Subwoofer with a perfectly matched slot ported enclosure, precisely designed and engineered in the USA. Featuring Alpine’s HAMR (High Amplitude Multi Roll) surround previously only found on Type-R and Type-X subwoofers, the new Type-S subs play louder and lower than ever before. Plus, improved power handling and an advanced airflow system mean they can produce more bass non-stop. With an aluminium look cone and stylish carpeted box, this subwoofer in enclosure looks as good as it sounds.

Features

  • Aluminium Designed Cone
  • High Amplitude Multi Roll (HAMR)
  • Designed & Engineered in USA
  • Slot Port Box Design
  • Heavy Gauge Screw Terminals
  • 1500W Peak Power
  • 500W RMS Power
  • Voice Coil configuration: 4ohm + 4ohm
  • Frequency Response: 24Hz – 200Hz
  • Dimensions: (L x H x W cm) 45 x 43 x 41

Specifications

Power Handling

  • Power Range: 150W – 500 Watts
  • RMS Power Handling: 500W
  • Peak Power Handling: 1500W

Dimensions

  • Mounting Depth: 177mm (7”)
  • Mounting Diameter: 347mm (13.7”)
  • Displacement: 0.07 cu. Ft.
  • Added Volume: 0.15 cu. ft. (Reverse Mount, Magnet Out)

General

  • Frequency Response: 24Hz – 200Hz

SBS-S15D4

Description

The SBS-S15D4 combines the new Type-S 15″ Subwoofer with a perfectly matched slot ported enclosure, precisely designed and engineered in the USA. Featuring Alpine’s HAMR (High Amplitude Multi Roll) surround previously only found on Type-R and Type-X subwoofers, the new Type-S subs play louder and lower than ever before. Plus, improved power handling and an advanced airflow system mean they can produce more bass non-stop. With an aluminium look cone and stylish carpeted box, this subwoofer in enclosure looks as good as it sounds.

Features

  • High Grade MDF Construction
  • SWS-15D4 Pre-installed
  • 500W RMS Power Handling
  • 1500W Peak Power Handling
  • Heavy Gauge Screw Terminals
  • Dimensions (L x W x H) 490mm x 530mm x 390mm

Specifications

  • Power Range: 150W – 500 Watts
  • RMS Power Handling: 500W
  • Peak Power Handling: 1500W
  • Frequency Response: 24Hz – 200Hz

SBR-S12D4

Description

  • Kevlar-Reinforced Carbon Fibre Cone
  • High Amplitude Multi Roll (HAMR) surround
  • Designed and Engineered in USA
  • Slot port box design
  • Heavy gauge screw terminals
  • 3000W Peak Power
  • 1000W RMS Power
  • Voice Coil configuration: 4ohm + 4ohm
  • Frequency Response: 26Hz-200Hz
  • Dimensions: (L x H x Wcm) 45 x 43 x 41

Features

  • Kevlar-Reinforced Carbon Fibre Cone
  • High Amplitude Multi Roll (HAMR) surround
  • Designed and Engineered in USA
  • Slot port box design
  • Heavy gauge screw terminals
  • 3000W Peak Power
  • 1000W RMS Power
  • Voice Coil configuration: 4ohm + 4ohm
  • Frequency Response: 26Hz-200Hz
  • Dimensions: (L x H x Wcm) 45 x 43 x 41

Specifications

  • Sealed: 12″
  • Frequency Response: 24Hz-200Hz
  • Power Range: 300W – 1000W RMS
  • RMS Power Handling: 1000W
  • Peak Power Handling: 3000W
  • Magnet Weight: 127oz
  • Voice Coil Diameter: 65.5 mm (2.6″)

Thiel-Small Parameters

  • Sensitivity (1W/1m): 84.9dB
  • DC Resistance: 3.8ohms + 3.8ohms
  • Inductance: 3.33 mH
  • Free Air Resonance: 28 Hz
  • Equivalent Stiffness: 46L
  • Mechanical Q: 6.04
  • Electrical Q: 0.52
  • Total Q: 0.48
  • Cone Area: 479cm²
  • Linear Excursion: 20 mm
  • Mechanical Travel: 72 mm

SBR-S83V

Description

The SBR-S83V features Alpine’s Type-R 8″ subwoofer in a custom slot ported enclosure. Ideal for installation in small spaces, its compact size means it can fit virtually anywhere.

The pre-installed subwoofer employs many features typically found in larger models, such as Alpine’s H.A.M.R (High Amplitude Multi Roll) suspension. This unique design allows greater linear excursion while improving control, to achieve maximum output and oustanding sound quality.

Designed to achieve optimal output, the carpeted enclosure features heavy duty MDF construction. Plus, stylish brushed aluminium laminate and a robust grill create the perfect balance of stunning easthetics and practicality.

Features

  • 900W Peak Power
  • 300W RMS Power
  • High Amplitude Multi Roll (HAMR) surround
  • Frequency Response: 28Hz – 400Hz
  • USA Designed Slot Ported Subwoofer Enclosure
  • Heavy Gauge Spring Terminals
  • Dimensions: (L x W x H cm) 49 x 29 x 16
  • SWR-823D Pre-installed
  • Grille Included

Specifications

  • Subwoofer Size: 8″
  • Power Handling (RMS/Peak): 350W/1000W
  • Power Range (RMS): 150W-350W
  • Frequency Response (Hz): 28Hz-200Hz
  • Diaphragm Material: Kevlar-Reinforced Pulp Fiber
  • Diaphragm Design: 2-piece structural parabolic
  • Surround Material: Injection molded santoprene
  • Surround Design: High Amplitude Multi-Roll (Patent Pending)
  • Spider Material: Nomex
  • Spider Design: Progressive
  • Voice Coil Material: 180˚C High Temp Wire on Spiral Cut Aluminium Former
  • Voice Coil Design: 4-Layer Dual Voice Coil
  • Motor Structure Pole Geometry: Compound Radius Curve
  • Motor Structure Configuration: Integration Shorting Sleeve with Radial Vented VC Head Transfer
  • Magnet Material: High-Power Strontium Ferrite
  • Magnet Configuration: 6-Piece (8″) / 10-Piece (10″/12″) Radially Segmented, Double Stacked
  • Frame Material: Cast Aluminium
  • Frame Design: Single-Piece Casting with Airflow Management System
  • Terminals Layout: One sided
  • Terminals Design: Heavy Duty 8ga, Push with housing, Banana Sockets for VC Configuration Jumpers
  • Tinsel Leads Design: Reinforced Layer Spider Integration
  • Gasket Design: Concealed Mount Gasket System and Integrated Grill Ready

ELECTRO-MECHANICAL PARAMETERS

  • Nominal Impedance: 2ohms+2ohms
  • Frequency Response: 28-200Hz
  • Sensitivity (SPL @ 1W/1m): 83.5dB
  • D.C Coil Resistance (Re): 1.85ohms +1.85ohms
  • Inductance (Le) 1kHz/20kHz: 0.87mH/0.30mH
  • Free Air Resonance (Fs): 38Hz
  • Equivalent Stiffness (Vas): 12L (0.42 ft³)
  • Mechanical Q (Qms): 7.8
  • Electrical Q (Qes): 0.55
  • Total Q (Qts): 0.50
  • Xmax10 (One-Way Xmax @ 10% Distortion): 14mm
  • Mechanical Excursion, Peak-to-Peak: 52mm
  • Gap Height (Hag): 10mm
  • Coil Height (Hvc): 29mm
  • Cone Area (Sd): 201 cm²
  • Voice Coil Diameter: 40mm (1.6″)
  • Magnet Weight: 52oz

SBR-S10T

Description

This Type-R 10″ Thin Subwoofer comes already built into a specially custom made sub box. Ready to be installed without the hassle of building a box for your subwoofer.

Features

  • Custom carbon fibre look sealed subwoofer enclosure
  • SWR-T10 subwoofer pre-installed
  • High density construction
  • Heavy gauge screw terminals
  • Grille with chrome badge included
  • Concealed mounting frame included

Specifications

Dimensions

  • Length 47cm x Width 40cm x Height 16cm

Diaphram

  • Material: Aluminum
  • Design: Structural Parabolic w/ Force Transfer Assembly

Surround

  • Material: Injected Molded Santoprene
  • Design: FEA-Optimized High Amplitude Mutli-Roll (H.A.M.R.) (Patent Pending)
  • Spider Material: Thermoplastic Elastomer (TPE)
  • Design: Co-Molded Regressive w/ Integrated Tinsel Leads Voice Coil
Material:
  • 220C Edge-Wound Copper Ribbon Wire
Design:
  • Oversized 100mm (4”) Underhung Voice Coil Motor Structure
  • Pole Geometry: FEA-Optimized Dual Compound Radius Curve w/ Pass Through
  • Gap Design (Patent #6,639,993, 2 Patents Pending)
Configuration:
  • Radial Vented VC Heat Sink Shorting Sleeve w/ Airflow
  • Management System (Patent 7,634,101) Frame
Material:
  • Cast Aluminum
Design:
  • Direct-Couple Shorting Sleeve/Heatsink and Frame Design Terminals
Layout:
  • One Side
  • Design
  • Heavy Duty Gold-Plated Insert Block Terminals Tinsel Leads
  • Design: Woven Spider Integration Design Gasket
  • Design: Concealed MountGasket System (US Patent #7,760,900)
Power Handling
  • CEA-2031 Power Rating: 600W
  • Power Range: 300 – 600 Watts
  • RMS Power Handling: 600W
  • Peak Power Handling: 1800 Watts
General
  • Frequency Response: 28Hz – 200Hz

SBR-S12T

Description

This Type-R 12″ Thin Subwoofer comes already built into a specially custom made sub box. Ready to be installed without the hassle of building a box for your subwoofer.

Features

  • Custom carbon fibre look sealed subwoofer enclosure
  • SWR-T12 subwoofer pre-installed
  • High density construction
  • Heavy gauge screw terminals
  • Grille with chrome badge included
  • Concealed mounting frame included

Specifications

Dimensions

  • Length: 52 cm x Width: 43 cm x Height: 18 cm

Diaphram

  • Material: Aluminum
  • Design: Structural Parabolic w/ Force Transfer Assembly

Surround

  • Material: Injected Molded Santoprene
  • Design: FEA-Optimized High Amplitude Mutli-Roll (H.A.M.R.) (Patent Pending)

Spider

  • Material: Thermoplastic Elastomer (TPE)
  • Design: Co-Molded Regressive w/ Integrated Tinsel Leads

Voice Coil

  • Material: 220C Edge-Wound Copper Ribbon Wire
  • Design: Oversized 100mm (4”) Underhung Voice Coil

Motor Structure

  • Pole Geometry: FEA-Optimized Dual Compound Radius Curve w/ Pass Through
  • Gap Design (Patent #6,639,993, 2 Patents Pending)
  • Configuration: Radial Vented VC Heat Sink Shorting Sleeve w/ Airflow
  • Management System (Patent 7,634,101)

Frame

  • Material: Cast Aluminum
  • Design: Direct-Couple Shorting Sleeve/Heatsink and Frame Design

Terminals

  • Layout: One Side
  • Design: Heavy Duty Gold-Plated Insert Block Terminals

Tinsel Leads

  • Design: Woven Spider Integration Design

Gasket

  • Design: Concealed MountGasket System (US Patent #7,760,900)

Power Handling

  • CEA-2031 Power Rating: 600W
  • Power Range: 300 – 600 Watts
  • RMS Power Handling: 600W
  • Peak Power Handling: 1800 Watts

General

  • Frequency Response: 26Hz – 200Hz


Warning: in_array() expects parameter 2 to be array, null given in /home/aavaus/public_html/wp-includes/class.wp-dependencies.php on line 213