SWR-T10

Description

10″ Thin Subwoofer Alpine’s Type-R Thin Subwoofers have been engineered to offer greater installation flexibility. At only 82mm deep the SWR-T10 provides deep bass performance where traditional subwoofers just can’t fit. Boasting several unique Alpine technologues in its industry-first design, these innovations allow the Type-R Thin to have the output and power handling of the traditional Type-R series in less that half the depth. An all-new FEA Optimised motor structure and HAMR surround give the new Type-R Thin subwoofers the highest X-max and SPL output in their class. Alpine’s patent pending Pass-Through Gap Geometry, allows the unique Thermoplastic Elastomer Segmented Spider to completely pass through the motor structure. This means the cone and voice coil assembly have the clearance needed for over 50mm of peak-to-peak excursion, allowing for massive output even in such a shallow frame. The new Type-R Thin design has the same DNA of the standard Type-R subs – demanding cleaner, deeper bass extension, faster, more accurate transients and even greater output capability.

Features

Diaphram

  • Material: Aluminum
  • Design: Structural Parabolic w/ Force Transfer Assembly Surround
  • Material: Injected Molded Santoprene
  • Design: FEA-Optimized High Amplitude Mutli-Roll (H.A.M.R.) (Patent Pending) Spider
  • Material: Thermoplastic Elastomer (TPE)
  • Design: Co-Molded Regressive w/ Integrated Tinsel Leads Voice Coil
  • Material: 220C Edge-Wound Copper Ribbon Wire
  • Design: Oversized 100mm (4”) Underhung Voice Coil Motor Structure
  • Pole Geometry: FEA-Optimized Dual Compound Radius Curve w/ Pass Through Gap Design (Patent #6,639,993, 2 Patents Pending)
  • Configuration: Radial Vented VC Heat Sink & Shorting Sleeve w/ Airflow Management System (Patent 7,634,101) Frame
  • Material: Cast Aluminum
  • Design: Direct-Couple Shorting Sleeve/Heatsink and Frame Design Terminals
  • Layout: One Side
  • Design: Heavy Duty Gold-Plated Insert Block Terminals Tinsel Leads
  • Design: Woven Spider Integration Design Gasket
  • Design: Concealed Mount Gasket System (US Patent #7,760,900

Specifications

Power Handling

  • CEA-2031 Power Rating: 600W
  • Power Range: 300 – 600 Watts
  • RMS Power Handling: 600W
  • Peak Power Handling: 1800W

Dimensions

  • Mounting Depth: 82 mm (3.25”)
  • Mounting Diameter: 231 mm (9.1”)
  • Displacement: 0.07 cu. ft (Front Mount)
  • Added Volume: 0.04 cu. ft. (Reverse Mount, Magnet Out)

General

  • Frequency Response: 28Hz – 200Hz
  • FEA Optimised HAMR Surround
  • Thermoplastic Elastomer Spider
  • 4″ Voice Coil
  • Radial Vented VC Heatsink
  • 4ohm Impedance
  • Aluminium Cone
  • Cast Aluminium Frame

SWR-T12

Description

12″ Thin Subwoofer Alpine’s Type-R Thin Subwoofers have been engineered to offer greater installation flexibility. At only 89mm deep the SWR-T12 provides deep bass performance where traditional subwoofers just can’t fit. Boasting several unique Alpine technologues in its industry-first design, these innovations allow the Type-R Thin to have the output and power handling of the traditional Type-R series in less that half the depth. An all-new FEA Optimised motor structure and HAMR surround give the new Type-R Thin subwoofers the highest X-max and SPL output in their class. Alpine’s patent pending Pass-Through Gap Geometry, allows the unique Thermoplastic Elastomer Segmented Spider to completely pass through the motor structure. This means the cone and voice coil assembly have the clearance needed for over 50mm of peak-to-peak excursion, allowing for massive output even in such a shallow frame. The new Type-R Thin design has the same DNA of the standard Type-R subs – demanding cleaner, deeper bass extension, faster, more accurate transients and even greater output capability.

Features

Diaphram

  • Material: Aluminum
  • Design: Structural Parabolic w/ Force Transfer Assembly

Surround

  • Material: Injected Molded Santoprene
  • Design: FEA-Optimized High Amplitude Mutli-Roll (H.A.M.R.) (Patent Pending) Spider
  • Material: Thermoplastic Elastomer (TPE)
  • Design: Co-Molded Regressive w/ Integrated Tinsel Leads Voice Coil
  • Material: 220C Edge-Wound Copper Ribbon Wire
  • Design: Oversized 100mm (4”) Underhung Voice Coil Motor Structure
  • Pole Geometry: FEA-Optimized Dual Compound Radius Curve w/ Pass Through Gap Design (Patent #6,639,993, 2 Patents Pending)
  • Configuration: Radial Vented VC Heat Sink & Shorting Sleeve w/ Airflow Management System (Patent 7,634,101) Frame • Material: Cast Aluminum
  • Design: Direct-Couple Shorting Sleeve/Heatsink and Frame Design Terminals
  • Layout: One Side
  • Design: Heavy Duty Gold-Plated Insert Block Terminals Tinsel Leads
  • Design: Woven Spider Integration Design Gasket
  • Design: Concealed Mount Gasket System (US Patent #7,760,900)

Specifications

Power Handling

  • CEA-2031 Power Rating: 600W
  • Power Range: 300 – 600 Watts
  • RMS Power Handling: 600W
  • Peak Power Handling: 300 – 600 Watts

Dimensions

  • Mounting Depth: 89 mm (3.5”)
  • Mounting Diameter: 275mm (10.85”)
  • Displacement: 0.08 cu. ft (Front Mount)
  • Added Volume: 0.05 cu. ft. (Reverse Mount, Magnet Out) General
  • Frequency Response: 26Hz – 200Hz
  • FEA Optimised HAMR Surround
  • Thermoplastic Elastomer Spider
  • 4″ Voice Coil
  •  Radial Vented VC Heatsink
  • 4ohm Impedance
  • Aluminium Cone
  • Cast Aluminium Frame

SWR-10D2/D104

Description

Description

Features

No features for this product at this time.

Specifications

Specs

SWR-10D2_D12D4

SWR-10D2/D12D4

Description

Description

Features

No features for this product at this time.

Specifications

Specs

Pictures

SWR-10D2_D12D4 SWR-10D2_D12D4-side

SBR-S12T

Description

Description

Features

No features for this product at this time.

Specifications

Specs

SBR-S12D4

SBR-S12D4

12″ Subwoofer Vented Enclosure

Description

The SBR-S12D4 is a slot ported box designed and engineered in the USA, featuring the new 12″ Type-R Subwoofer capable of handling a massive 1000 watts RMS!

This stylish enclosure is perfectly matched to the subwoofer for optimum output and sound quality. Built to play low and loud, the SBR-S12D4 delivers powerful, clean bass with exceptional accuracy and deeper bass excursion.

With new aesthetics and improved power handling over previous models, the new SBR-S12D4 sets the benchmark for looks and performance.

Features

Kevlar-Reinforced Carbon Fibre Cone

  • High Amplitude Multi Roll (HAMR) surround
  • Designed and Engineered in USA
  • Slot port box design
  • Heavy gauge screw terminals
  • 3000W Peak Power
  • 1000W RMS Power
  • Voice Coil configuration: 4ohm + 4ohm
  • Frequency Response: 26Hz-200Hz
  • Dimensions: (L x H x Wcm) 45 x 43 x 41

Specifications

General

  • Sealed: 12″
  • Frequency Response: 24Hz-200Hz
  • Power Range: 300W – 1000W RMS
  • RMS Power Handling: 1000W
  • Peak Power Handling: 3000W
  • Magnet Weight: 127oz
  • Voice Coil Diameter: 65.5 mm (2.6″)

Thiel-Small Parameters

  • Sensitivity (1W/1m): 84.9dB
  • DC Resistance: 3.8ohms + 3.8ohms
  • Inductance: 3.33 mH
  • Free Air Resonance: 28 Hz
  • Equivalent Stiffness: 46L
  • Mechanical Q: 6.04
  • Electrical Q: 0.52
  • Total Q: 0.48
  • Cone Area: 479cm²
  • Linear Excursion: 20 mm
  • Mechanical Travel: 72 mm

swr_8d_group

SWR-8D2/D4

8″ Subwoofer

Description

Alpine’s all new Type-R 8″ Subwoofers incorporate a ground breaking design and innovative patents to deliver unrivalled SPL output and powerful low-end bass response, all in an incredibly compact package.

Built for extreme performance and endurance they maintain Alpine’s High Amplitude Multi-Roll (HAMR) surround found on larger Type-R and Type-X Subwoofers. This patented design offers greater excursion and remarkable cone movement efficiency to achieve outstanding output and benchmark sound quality.

Capable of handling 350w RMS, these subwoofers are guaranteed to produce massive amounts of bass. To continuously utilise this power, Alpine’s Airflow Management system cools the voice coils to ensure maximum output during extended playing time.

Designed for installation in small enclosures, these impressive subwoofers will fit almost anywhere. With their stylish looks and flexible wiring options these subwoofers will improve sound quality without compromising space.

Features

  • Aluminium Designed Cone
  • High Amplitude Multi-Roll (HAMR) surround
  • Advanced Airflow System
  • Heavy Gauge Push Terminals
  • 114mm Mounting Depth

Specifications

  • Peak Power: 1000W
  • RMS Power: 350W
  • Frequency Response: 30Hz – 200Hz

Images

swr_8d_group swr_8d4_side


Warning: in_array() expects parameter 2 to be array, null given in /home/aavaus/public_html/wp-includes/class.wp-dependencies.php on line 213