FPS 1.500

Single channel symmetric amplifier

Features

  • Progressive controlled cooling system
  • Regulates the amplifier temperature
  • Insulated Gate Bipolar Transistor (IGBT)
  • Audiophile and powerful
  • Symmetric design
  • Audiophile quality
  • Direct Mode
  • The audio signal is directly amplified
  • High-pass, low-pass and band-pass crossovers Adjustable from 50Hz to 5kHz
  • Pseudo-balanced input
  • No parasite
  • Controlled cooling system
  • Air flow control
  • Safety terminal
  • Cable and sheath complete integration

Specifications

  • RMS power – 14.4V @ 4ohm: 1x325W RMS
  • RMS power – 14.4V @ 2ohm: 1x550W RMS
  • RMS power – 14.4V @ 1ohm: 1x800W RMS
  • Signal/noise ratio (@ CEA power): 87dBA
  • Damping factor into 4ohm @ 100Hz: 220
  • Frequency response (-1dB): 10Hz-2.5kHz
  • High-pass crossover: -
  • Low-pass crossover: 50Hz – 500Hz
  • Dimensions (HxWxD): 59x353x254mm

fps_4.160

FPS 4.160

FPS 4-channel Amplifier

Description

The FPS 4160 4-channel amplifier sends 120 watts RMS per channel to your front and rear pairs of full-range speakers or components. You can use this versatile amp to power four 2-ohm subs with 200 watts RMS each, or switch to 2-channel mode and drive a pair of subs with 380 watts RMS each. You can even power your front speakers with two of the amp’s channels while bridging the rear channels to drive a single sub. High-pass, low-pass, and band-pass filtering adjusts the output to match a wide variety of speakers, components, and sub combinations. And a wired remote level control for the rear cahannels give you even more control over your subs’.

Features

There are currently no features for this item.

Specifications

  • 4-channel car amplifier
  • 120 watts RMS x 4 at 4 ohms (200 watts RMS x 4 at 2 ohms)
  • 380 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)
  • CEA-2006 compliant
  • variable high- and low-pass filters (50-500 Hz or 500-5K Hz)
  • variable band-pass filter (50-500 Hz, 500-5K Hz)
  • Class-AB amplifier design
  • thermostat-controlled, progressive-speed cooling fan
  • remote level control (channels 3-4)
  • optional High Cap outboard capacitor modules increase power efficiency
  • frequency response: 10-52,000 Hz
  • preamp inputs
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • fuse rating: 40A x 2
  • Dimensions: 59 x 429 x 254 (HxWxD) mm
  • High-Cap Plug-in capacitors
  • Optional High Cap outboard capacitor modules plug directly into the amp, smoothing out any power fluctuations caused by sudden system demands, so you enjoy consistent, superb sound quality. The FPS1500 amplifier accepts two High Cap modules, one for each section of the dual power supply.

fd-13501

FD 1.350

FD Compact Mono Amplifier

Description

The FD 1.350 is a mono block amplifier specifically designed for handling a subwoofer channel. It has a power of 210 and 350 Watts RMS under 4 and 2 Ohms respectively. In order to configure the system’s bass according to the car’s installation; it is equipped with an active crossover, bass correction and phase adjustment.

  • Mono D Class amplifier with dual output
  • High-level inputs with auto-detection / RCA low-level inputs
  • Compatible with OEM head units thanks to the audio transformers – auto detection feature

Features

There are currently no features for this item.

Specifications

  • D Class – Direct Fet Technology – Efficient heat dissipation and precision
  • Stable under 2 Ohms
  • Stackable aluminium chassis with high heat dissipation
  • Low noise operational amplifier New Japan Radio® NJM4580
  • Low ESR capacitors – 105°C (220°F)
  • Pseudo-balanced inputs
  • Cable accessories included – easy to install

fd-23501

FD 2.350

FD Compact 2-channel Amplifier

Description

The FD 2.350 is a 2-channel model delivering a power of 2 x 105 Watts RMS under 4 Ohms. For a perfect matching, it’s featuring an active high-pass and lowpass crossover. The FD 2.350 can consequently drive a pair of speaker drivers or a subwoofer.

  • Stereo D Class bridgeable amplifier
  • High-level inputs with auto-detect / RCA low-level inputs
  • Compatible with OEM head units thanks to the audio transformers – auto detection feature

Features

There are currently no features for this item.

Specifications

  • D Class – Direct Fet Technology – Efficient heat dissipation and precision
  • Stable under 2 Ohms
  • Stackable aluminium chassis with high heat dissipation
  • Low noise operational amplifier New Japan Radio NJM4580
  • Low ESR capacitors – 105°C (220°F)
  • Pseudo-balanced inputs
  • Cable accessories included – easy to install

fd-43501

FD 4.350

FD Compact 4-channel Amplifier

Description

The FD 4.350 is the 4-channel model (4 x 58 Watts RMS) and the most versatile of the range. It can operate in 4-, 3- or 2-channel mode. In most cases, it will be used to amplify a car’s front and rear speaker drivers. It can also be used to drive front speaker drivers and a small subwoofer, for a small installation which stays simple and integrated.

  • 4/3/2-channel D Class amplifier
  • High-level inputs with auto-detect / RCA low-level inputs
  • Compatible with OEM head units thanks to the audio transformers – auto detection feature

Features

There are currently no features for this item.

Specifications

  • D Class – Direct Fet Technology – Efficient heat dissipation and precision
  • Stable under 2 Ohms
  • Stackable aluminium chassis with high heat dissipation
  • Low noise operational amplifier New Japan Radio NJM4580
  • Low ESR capacitors – 105°C (220°F)
  • Pseudo-balanced inputs
  • Cable accessories included – easy to install

sub-p30

SUB P30

Performance 12″ Subwoofer

Description

With heavy ferrite magnets and 4-layer voice coils, it’s no surprise this sub handles plenty of power — up to 250 watts RMS. The good sensitivity rating means your amp won’t have to work so hard to drive this sub, so you’ll get maximum wallop per watt. The dual 4-ohm voice coils allow you to wire the sub for either 2-ohm or 8-ohm impedance, and you’ll appreciate that versatility as your system grows and changes. You can install this sub in a sealed box for tight, punchy bass, or in a ported enclosure for a little more boom.

Features

There are currently no features for this item.

Specifications

  • 12″ 4-ohm subwoofer
  • polypropylene cone with butyl rubber surround
  • power range: 100-250 watts RMS
  • peak power handling: 500 watts
  • frequency response: 35-500 Hz
  • sensitivity: 90.8 dB
  • top-mount depth: 5-3/4″
  • sealed box volume: 0.88-1.59 cubic feet
  • ported box volume: 1.24-2.82 cubic feet


Warning: in_array() expects parameter 2 to be array, null given in /home/aavaus/public_html/wp-includes/class.wp-dependencies.php on line 213